Condenser Transformer bushings
Nanjing Rainbow Electric Co., Ltd Condenser bushings product are classified as Wall Bushing, Transformer Bushing, GIS Lead-out Bushing, Oil/Oil bushing that connecting transformer and oil-filled equipment, Oil/SF6 bushing that connecting transformer and GIS. According to the capacitive main insulation,product are classified as Oil Impregnated Paper (OIP) Capacitor Bushing, Resin Impregnated Paper(RIP) Bushing, Glassfiber Reinforced Plastic (GFRP) Dry-type Bushing and Vacuum Epoxy Resin Impregnated Fiberglass (RIP) Capacitor Bushing.
Key Technical Parameters-IEC |
Standard |
IEC 60137-2017 |
Highest voltage for equipment Um |
kV |
72.5 |
100 |
123 |
145 |
170 |
Rated frequency |
Hz |
50/60 |
50/60 |
50/60 |
50/60 |
50/60 |
Lightning impulse (BIL) |
kV |
325 |
450 |
550 |
650 |
750 |
Maximum Rated Current |
A |
3150 |
3150 |
3150 |
3150 |
3150 |
1. Introduction (Dry-type Bushing)
NJREC dry type high voltage bushing are with following advantages: no oil, no gas, no SFogas, small volume, light weight, free for maintenance, can be installed with high accurate current transformer.
For the electrical insulation performance, the partial discharge are developed to less than 5pC from the former 100pC and the former institute research become mass production, while fine quality is guaranteed. Experiences on more different bushings are also accumulated, such as high current bushing, special-shaped bushings,bushings for high voltage apparatus.
The rated voltage¤t is: Rated voltage:40.5, 72.5, 126, 252, 550kV Rated voltage:630-2000A(or up to 5000A as per requirement)
2.Application condition
The bushings are applied for altitude 1000m-2000m and lower district, if higher than 2000m, technical condition shell be negotiated again.
3. Technical Standard.
Products are in compliance with GB/T 4109-2008 (IEC 60137 MOD)-Insulated bushings for alternating voltages above 1000 V.